Once you have any of your Juniper EX switches managed by Mist cloud environment it is advised not to make any configuration changes from the switch CLI rather make use of Site/Template/Rule-based/Additional CLI Commands. To remove any config from the switch we need to append ‘delete’ for any command that needs to be deleted. EX:...
- Getting Started
- Wireless
- Wired Switching
- WAN Edge
- Mist Access Assurance
- Location Based Services
- Premium Analytics
- Security and Cloud Administration
- MSP
- Automation
- Product Updates
- Marvis
- Security Alerts
- FAQ
Configuration
In this video, Our EVPN deployment utilizes EBGP as the underlay protocol for communication between our border gateways, while iBGP is used in the overlay for communication between our EVPN instances.
Network Configuration Example: Campus Fabric IP Clos Wired Assurance
How to Configure the switch as DHCP Server/Relay for a Network – Pre-Requisites for DHCP server or Relay configuration – Make sure the VLAN for which DHCP server will be configured on switch is assigned to the port/s connecting to the DHCP clients. Make sure switch has a Static IP Configuration or Additional IP configuration...
EX switches offer an extensive port security suite, including ways to track IP to DHCP mapping, block spoofed ARP responses, and ensure that malicious actors can’t impersonate someone on the wired network. This configuration is greatly simplified on the Mist portal. Enable these checkboxes with caution. Please read below for more details: TRUSTED VS....
Why use Dynamic Port Configuration? Traditionally, ports are configured on a switch based on the device that is connected with a few parameters like VLAN, Trunk/Access etc on every single port basis. Port profiles provide one layer of abstraction to create those profiles with the above parameters once and then re-uses them on ports as...
Select the Campus Fabric option, under the Wired Section of the Organization Tab: Select EVPN Multihoming and complete the required fields below (default settings suffice): Topology Name: The configuration name should represent the Campus Fabric being deployed Overlay Settings: Define the BGP AS used to build the Overlay between the Collapsed Core switches Underlay...