Super User Read/write access to entire organization. No restrictions. Network Admin (All Sites Access) Cannot claim switches Able to adopt switches Cannot release the switch Able to click on switch to see details Able to access utility tools (ping, trace route, cable test, bounce port) Can access switch shell Able to reboot the switch Can...
- Getting Started
- Wireless
- Wired Switching
- WAN Edge
- Mist Access Assurance
- Location Based Services
- Premium Analytics
- Security and Cloud Administration
- MSP
- Automation
- Product Updates
- Marvis
- Security Alerts
- FAQ
Configuration
Configuration on the switch "set groups mist-qos-default class-of-service classifiers dscp dscp-classifier-default forwarding-class bizapp-af2 loss-priority high code-points af22", "set groups mist-qos-default class-of-service classifiers dscp dscp-classifier-default forwarding-class bizapp-af2 loss-priority high code-points af23", "set groups mist-qos-default class-of-service classifiers dscp dscp-classifier-default forwarding-class bizapp-af2 loss-priority low code-points af21", "set groups mist-qos-default class-of-service classifiers dscp dscp-classifier-default forwarding-class bizapp-af3 loss-priority high code-points...
Here are some recommended configurations for your switch ports to work seamlessly with the Mist APs: On a trunk port, prune all the unwanted VLANs – only the required VLANs (based on WLANs) should be part of allowed VLANs. Since our APs do not save the configuration by default, APs should be able to get...
Network Configuration Example: Campus Fabric Core Distribution-CRB-Wired Assurance
Network Configuration Example: Campus Fabric IP Clos Wired Assurance
DHCP Snooping: DHCP snooping enables a switching device to examine all the DHCP traffic initiated from the untrusted ports on the network. When DHCP snooping is enabled on a VLAN, the system examines DHCP messages sent from untrusted hosts associated with the VLAN and extracts their IP addresses and lease information. This information is used...